BMW F30 Long Drive Shaft Assembly - Used Original Parts
RM 1,000
Condition: Used (Original)At a Glance
- BMW F30 Long Drive Shaft Assembly - Used Original Parts
- Part number: 32306886555
- Fits: BMW F30 330e, BMW F30 3 Series · confirm by chassis number before ordering
- Used Original · tested working
- RM 1,000 · final quote via WhatsApp
- M.S. Motor · Kuala Lumpur, Malaysia · ready stock
Diagnosis and Common Symptoms
The long drive shaft (also known as the front propeller shaft or CV shaft assembly on xDrive models) on the BMW F30 is responsible for transferring power from the transfer case to the front differential/axle. Wear or failure in this component typically presents as a distinct clicking or knocking noise during tight turns, low-speed acceleration, or when reversing. Drivers may also notice a rhythmic vibration through the cabin floor that intensifies with vehicle speed, often mistaken for wheel balance issues. In more advanced cases, a failing CV joint on the shaft can produce grease flinging inside the wheel well due to a torn boot, or a clunking sensation during gear engagement (Drive to Reverse). While drive shaft wear rarely triggers a specific hard fault code, DSC or 4WD-related warning lights (such as "4WD Malfunction" or intermittent DSC activation) can appear on xDrive variants when shaft imbalance or joint play affects wheel speed sensor readings, leading technicians to misdiagnose ABS or DSC modules when the root cause is mechanical driveline wear.
Introduction
This Genuine Used BMW F30 Long Drive Shaft Assembly has been sourced from an actual salvage unit and inspected by our senior technicians to confirm structural integrity and joint condition. Unlike aftermarket reproductions, this is a factory Genuine component engineered to BMW's original torque and balance specifications, ensuring smooth power delivery without induced vibration. Every unit undergoes a Tested Working verification process, checking for boot condition, joint play, and shaft straightness before listing. For F30 owners seeking a cost-effective, reliable alternative to new dealer pricing, this assembly offers genuine fitment confidence backed by our workshop's inspection standard.
Product Details
-
Brand: BMW
-
Model Compatibility: F30 (3 Series, 2012–2018), including xDrive variants where applicable
-
Part Name: Long Drive Shaft Assembly (Front Propeller / CV Shaft)
-
Condition: Genuine Used (Tested Working)
-
Notes: Inspected for shaft straightness, CV joint play, and boot integrity; free of excessive corrosion or impact damage; recommend inspecting mounting bolts and center support bearing during installation
Frequently Asked Questions
What symptoms indicate the F30 long drive shaft needs replacement before total failure?
Early signs include a clicking noise during sharp turns, low-speed clunking when shifting into gear, and cabin vibration that scales with road speed. On xDrive models, intermittent 4WD or DSC warning lights can also appear due to joint play affecting wheel speed sensor input.
Does replacing the long drive shaft on an F30 xDrive require any coding or adaptation?
No coding or module programming is required. The long drive shaft is a purely mechanical component; however, if the replacement was triggered by a DSC fault, a wheel speed sensor recalibration or fault code clearing via ISTA is recommended after installation.
How do I confirm this drive shaft matches my specific F30 chassis and drivetrain?
Always verify compatibility using the BMW part number stamped on the original shaft or listed in your vehicle's parts catalog (via VIN lookup), since F30 shafts differ between rear-wheel drive and xDrive configurations, as well as by engine and transmission type.
Is a used drive shaft assembly reliable compared to buying new, especially for owners in Malaysia?
A genuine used drive shaft, when properly tested for joint play and shaft straightness, typically offers years of remaining service life at a fraction of new OEM dealer cost. Given F30 parts availability in Malaysia, sourcing a verified used unit is a practical solution that avoids the extended wait and premium pricing of new imports.
Are there installation gotchas to watch out for with this part?
Ensure the center support bearing and mounting bolts are inspected and torqued to BMW specification during installation, and confirm the CV boot clamps are properly seated to prevent premature grease loss and joint wear.
Part price does not include installation. Our workshop can install for you, labour is charged separately and confirmed with you before any work starts.
We cannot diagnose your car over WhatsApp or photos. Not sure this part will solve your problem? Come for a workshop check, diagnosis fee RM180. If you proceed with the repair using our parts, the RM180 is offset into the labour charge. If you decide not to repair, only the RM180 applies.
All parts are tested and guaranteed to work. Whether a part solves your car's problem can only be confirmed by diagnosis.
Shipping: from Kuala Lumpur, West Malaysia ~RM50, East Malaysia ~RM80 (estimate, confirm via WhatsApp). Delivery 1-2 working days in secure anti-static packaging.
Warranty: 30-day exchange for control units, engines, gearboxes and other major parts; 14 days for small parts. Claims require proof of installation by a qualified workshop. No warranty for items opened, modified, or damaged by wrong installation.
Prices vary with stock and part condition. Final price via WhatsApp.
Original Parts
Quality European Originals
Fast Delivery
Nationwide Shipping