BMW F20 F30 F32 F45 Fuel Pump Control Module 7447895 - Used Original Parts

Quick Answer

A fuel pump control module is the right fix when an F-series BMW cranks long, stalls or loses power and testing shows the pump is not at fault. It is also the right fix when fuel pump control faults sit in the fault memory. A tested used original unit suits Malaysian owners who want original-part fit and function at a lower price, with the warranty stated in the quote. It is a sensible choice for daily-driven 1, 2, 3 and 4 Series cars where the pump itself checks out.

Diagnosis and Common Symptoms

The fuel pump control module sits between the engine control unit (DME) and the electric fuel pump. It receives the fuel demand from the DME and drives the pump to match it. When it fails, the pump can be starved of its control signal even though the pump, fuse and fuel level are fine.

Typical symptoms on the F20, F30, F32 and F45 chassis:

• Long cranking or a no-start, with the engine turning over normally.
• Stalling while driving or at idle, sometimes followed by a restart after a short wait.
• Loss of power or hesitation under load, because fuel pressure cannot keep up.
• Intermittent faults that come and go with heat or vibration.
• Dashboard warnings such as an engine malfunction or drivetrain malfunction message, often with the car dropping into reduced power.
• Fault memory entries relating to the fuel pump control, fuel pressure or the pump's communication, which a BMW-capable scan tool can read.

Before replacing the module, confirm the basics. Check the fuel pump fuse, the supply voltage and ground at the module, the connector and wiring condition, and the actual fuel pressure. A weak pump or a wiring fault can look the same as a failed module. If the module is not responding or its output is wrong, replacement is the correct repair. The F30 fuel pump module is one of the most common applications for this unit.

Introduction

This is a Genuine Used fuel pump control module, an original BMW part taken from a donor car and tested before it is listed. We check that it works, and we supply actual photos and videos so you can see exactly what you are buying. As a Genuine part it keeps the factory hardware and the factory communication with the DME. It is a practical way to restore proper fuel delivery on your F-series BMW without paying for a new unit.

Product Details

• Brand: BMW
• Model Compatibility: BMW F30 3 Series, F45 2 Series, F22 2 Series Coupe, F32 4 Series, F20 1 Series
• Part Name: Fuel Pump Control Module
• Condition: Genuine Used (Tested Working)
• Notes: Coding may be needed after fitting, so have your workshop confirm this for your car.

Part Numbers and Fitment

• Part numbers: 7447895
• Fits: BMW F30 3 Series, BMW F45 2 Series, BMW F22 2 Series Coupe, BMW F32 4 Series, BMW F20 1 Series