1/3
BMW

BMW F30 F32 Steering Column Switch Module with Steering Angle Sensor 10112147-02 - Used Original Parts

RM 650

Condition: Used (Original)

At a Glance

  • BMW F30 F32 Steering Column Switch Module with Steering Angle Sensor 10112147-02 - Used Original Parts
  • Part number: 10112147-02 (1011214702)
  • Fits: BMW F30 3 Series 330e, BMW F30 3 Series, BMW F32 4 Series · confirm by chassis number before ordering
  • Used Original · tested working
  • RM 650 · final quote via WhatsApp
  • M.S. Motor · Kuala Lumpur, Malaysia · ready stock

Quick Answer

This module is the right fix when a BMW F30 or F32 shows steering angle or stability control warnings, or the indicator and wiper stalks stop responding, and the fault traces to the column switch cluster. A tested used original unit suits Malaysian owners who want a Genuine BMW part at a lower price, backed by the warranty stated in the quote. It is a sensible choice for a daily-driven 3 Series or 4 Series where original signal quality matters more than a sealed new box.

Diagnosis and Common Symptoms

On the F30 and F32, the steering column switch module (SZL) combines the steering angle sensor with the indicator, wiper and high beam switch functions. It reports the steering wheel position to the DSC and power steering systems. When the sensor or its internal electronics drift or fail, the car can no longer tell where straight ahead is.

Common symptoms:

  • DSC, ABS or stability control warning lamps on the dashboard
  • Steering or "Drivetrain" fault messages that return after being cleared
  • Indicator stalk not self-cancelling, or indicators and wipers responding intermittently
  • Cruise control or high beam stalk functions dropping out
  • Lane or driver assistance features unavailable, where fitted
  • Stored fault codes for steering angle sensor signal, plausibility or calibration, or for loss of communication with the column switch module

A scan of the DSC and column switch modules should come first. Confirm that the stored codes point to the steering angle sensor or the switch cluster before replacing anything. Wheel speed sensors, battery voltage faults and a recent alignment can raise similar warnings.

Introduction

This is a Genuine Used BMW steering column switch module with steering angle sensor, taken from the F30 and F32 platform. Every unit is tested for working function before it is listed, so you receive an original part that has been checked rather than assumed. A Genuine Used module keeps the original BMW sensor and switch design, which suits the tight signal tolerances that DSC and steering systems depend on. It is a practical way to restore correct steering angle readings and stalk operation at a lower cost than a new original.

Product Details

  • Brand: BMW
  • Model Compatibility: BMW F30 3 Series, BMW F32 4 Series
  • Part Name: Steering Column Switch Module with Steering Angle Sensor (Signal Switch)
  • Condition: Genuine Used (Tested Working)
  • Notes: Coding and steering angle calibration are needed after fitting.

Part Numbers and Fitment

  • Part numbers: 10112147-02
  • Fits: BMW F30 3 Series, BMW F32 4 Series

This is the BMW F30 steering angle sensor with signal switch. Compare the part number above with the number on your existing module before ordering.

Frequently Asked Questions

What symptoms point to a failed steering angle sensor in the BMW F30 steering column switch module?

On the BMW F30 and F32, a failing steering column switch module with steering angle sensor typically causes DSC or ABS warning lamps, steering-related fault messages, and stored codes for the steering angle signal. Indicator and wiper stalks may also act erratically. A scan of the DSC and column switch modules should confirm the cause before the module is replaced.

Does the BMW F30 steering column switch module need coding after installation?

Yes. The F30 and F32 steering column switch module with steering angle sensor needs coding to the vehicle and a steering angle calibration after fitting. Without these steps, the DSC system may not read the straight-ahead position correctly and warning lamps can stay on.

Which BMW models does this steering column switch module with steering angle sensor fit?

This steering column switch module with steering angle sensor fits the BMW F30 3 Series and the BMW F32 4 Series. To verify the match, compare the part number in the Part Numbers and Fitment section with the number on the module in your car. Check this before ordering, as BMW fits different column modules by model, equipment and production date.

Who is a tested used original BMW F30 steering column switch module best suited to?

A tested used original F30 or F32 steering column switch module suits owners who want a Genuine BMW part at a lower price than a new original, with the warranty stated in the quote. It fits daily drivers and well-kept 3 Series and 4 Series cars in Malaysia. We also supply brand-new original and brand-new China-made options, so the choice depends on what the owner wants from the repair.

Does the BMW F30 steering angle sensor unit include the signal switch?

Yes. This BMW F30 and F32 unit is the steering angle sensor with signal switch, supplied as the complete steering column switch module. The steering angle sensor and the indicator switch function are covered by this single module, so no separate sensor is normally required.

Part price does not include installation. Our workshop can install for you, labour is charged separately and confirmed with you before any work starts.

We cannot diagnose your car over WhatsApp or photos. Not sure this part will solve your problem? Come for a workshop check, diagnosis fee RM180. If you proceed with the repair using our parts, the RM180 is offset into the labour charge. If you decide not to repair, only the RM180 applies.

All parts are tested and guaranteed to work. Whether a part solves your car's problem can only be confirmed by diagnosis.

Shipping: from Kuala Lumpur, West Malaysia ~RM50, East Malaysia ~RM80 (estimate, confirm via WhatsApp). Delivery 1-2 working days in secure anti-static packaging.

Warranty: 7, 14 or 30 days depending on the part, as confirmed in your quote, from the invoice date. Exchange only, and our warranty mark must be intact. Proof of installation by a workshop is required. No warranty for parts opened, modified or damaged by wrong installation.

Prices vary with stock and part condition. Final price via WhatsApp.

Original Parts

Quality European Originals

Fast Delivery

Nationwide Shipping