BMW F10 Charge Air Induction Pipe 13717582314 - Used Original Parts
RM 280
Condition: Used (Original)At a Glance
- BMW F10 Charge Air Induction Pipe 13717582314 - Used Original Parts
- Part number: 13717582314 / 7582314-03 / 235576 / 10 / 10 / 220 / 59 / S01
- Fits: BMW F10 5 Series · confirm by chassis number before ordering
- Used Original · tested working
- RM 280 · final quote via WhatsApp
- M.S. Motor · Kuala Lumpur, Malaysia · ready stock
Diagnosis and Common Symptoms
The charge air induction pipe on the BMW F10 platform routes pressurized air from the turbocharger to the intake manifold. When this pipe develops cracks, loose clamps, or a failed connector seal, the ECU registers a boost pressure deviation, commonly triggering fault codes such as 2A8C (Charge Air System Leakage), 2987 (Boost Pressure Control Deviation), or 4599 (Charge Pressure Sensor Implausible Signal). Drivers typically notice a hissing or whistling sound under acceleration, a noticeable loss of turbo power, illuminated Check Engine or "Drivetrain Malfunction" warnings, and rough idle caused by unmetered air entering the intake tract. In more advanced cases, the vehicle may enter limp mode as the DME compensates for the unstable boost signal, leading to sluggish throttle response and reduced fuel efficiency.
Introduction
This listing is for a Genuine Used BMW F10 Charge Air Induction Pipe, part number 13717582314, removed from a running donor vehicle and thoroughly Tested for cracks, seal integrity, and clamp fitment before listing. As an original BMW component, it guarantees the exact OEM fitment, wall thickness, and connector geometry that aftermarket reproductions often fail to replicate. Every unit is pressure-inspected to rule out micro-fractures that cause slow boost leaks over time. Choosing a genuine used pipe offers reliable performance at a fraction of the cost of a brand-new dealer part.
Product Details
- Brand: BMW
- Model Compatibility: F10 5 Series
- Part Name: Charge Air Induction Pipe
- Part Number: 13717582314
- Condition: Genuine Used (Tested Working)
- Notes: Inspected for cracks, deformation, and o-ring seal condition; clamps and connector points checked for secure, leak-free fitment prior to sale
Frequently Asked Questions
What symptoms indicate the F10's charge air induction pipe 13717582314 needs replacement?
Common signs include a hissing or whistling noise under acceleration, delayed turbo response, illuminated Check Engine lights, and boost-related fault codes like 2A8C or 2987 stored in the DME.
Does replacing part number 13717582314 require any coding or adaptation?
No coding is required. This is a passive mechanical component, though it is recommended to clear stored boost pressure fault codes and perform a short test drive to confirm the leak is resolved.
How do I confirm this pipe fits my specific F10 model?
Cross-check the part number 13717582314 against your vehicle's original pipe, either stamped on the part itself or listed in your service records, since engine variants within the F10 range can use different induction pipe designs.
Is a used charge air pipe reliable compared to buying new from BMW?
Yes, this component has no moving parts or wear-prone seals like rubber hoses, so a genuine used pipe tested for cracks and leak integrity typically performs identically to new, making it a cost-effective choice in Malaysia.
Are there any installation gotchas with this part on the F10?
Ensure the factory clamps and o-rings are in good condition during reinstallation, as a loose clamp fit is the most common cause of recurring boost leak codes even with a good pipe.
Part price does not include installation. Our workshop can install for you, labour is charged separately and confirmed with you before any work starts.
We cannot diagnose your car over WhatsApp or photos. Not sure this part will solve your problem? Come for a workshop check, diagnosis fee RM180. If you proceed with the repair using our parts, the RM180 is offset into the labour charge. If you decide not to repair, only the RM180 applies.
All parts are tested and guaranteed to work. Whether a part solves your car's problem can only be confirmed by diagnosis.
Shipping: from Kuala Lumpur, West Malaysia ~RM50, East Malaysia ~RM80 (estimate, confirm via WhatsApp). Delivery 1-2 working days in secure anti-static packaging.
Warranty: 30-day exchange for control units, engines, gearboxes and other major parts; 14 days for small parts. Claims require proof of installation by a qualified workshop. No warranty for items opened, modified, or damaged by wrong installation.
Prices vary with stock and part condition. Final price via WhatsApp.
Original Parts
Quality European Originals
Fast Delivery
Nationwide Shipping