Audi TT MK2 8J Tail Light Right 8J0945096C - Used Original Parts

Description

Product Title

Audi TT MK2 8J Rear Tail Light Right 8J0945096C - Used Original Parts

Diagnosis and Common Symptoms

A failing rear tail light assembly on the Audi TT MK2 8J typically presents with a bulb-check warning on the dash cluster (indicator error or lighting fault message), inconsistent brake light or tail light illumination, moisture ingress causing fogged or water-stained lenses, and cracked or yellowed housing from UV exposure. Electrical faults often trace back to corroded bulb holder pins, damaged wiring connectors at the loom entry point, or a failed circuit board inside the LED strip (on facelift units). Physical damage from rear-end collisions or careless boot loading is the most common reason for replacement, as the housing is integrated into the fender and cannot be repaired once cracked. Owners may also notice condensation buildup inside the lens, which indicates a compromised seal and eventual electrical failure if left unaddressed.

Introduction

This is a Genuine Used right-side rear tail light assembly for the Audi TT MK2 8J, sourced from an actual salvage unit and identified under part number 8J0945096C. Every unit listed has been Tested for full illumination function including brake, tail, indicator, and reverse light circuits before being cleared for sale. As a Genuine Audi component, it guarantees correct fitment, factory-accurate light output, and OEM-grade lens clarity that aftermarket replicas often fail to match. Buyers get a reliable, cost-effective alternative to new parts without compromising on quality or fitment accuracy.

Product Details

• Brand: Audi
• Model Compatibility: Audi TT MK2 8J (2006-2014)
• Part Name: Rear Tail Light Right
• Part Number: 8J0945096C
• Condition: Genuine Used (Tested Working)
• Notes: Housing, lens, and bulb holders inspected for cracks and corrosion; wiring connector checked for pin integrity; all lighting functions verified under power before dispatch

Frequently Asked Questions

Q: How do I confirm this tail light 8J0945096C matches my Audi TT MK2 8J? A: Check the part number printed or molded on the back of your existing tail light housing, or look it up against your VIN through Audi parts records. Part 8J0945096C is specific to the right-side rear position on the 8J chassis, so confirming the number avoids mismatched connector types or lens variations between pre-facelift and facelift models.

Q: Does installing this tail light on the TT 8J require any coding or module programming? A: No coding is typically required for a like-for-like tail light swap on the TT MK2 8J, since the light itself is a passive component powered through the existing wiring harness. If your dashboard still shows a bulb-check warning after installation, check the bulb seating and connector pins rather than expecting a software fix.

Q: What is the typical lifespan of a used tail light versus buying new for the 8J0945096C? A: A tested used unit like this one can perform reliably for several more years if the lens seal and wiring remain intact, since the failure point is usually physical damage rather than electrical wear. Given that new genuine units are considerably more expensive, a verified used TT MK2 tail light offers strong value for Malaysian owners without sacrificing OEM fit and finish.

Q: Are there any installation gotchas specific to the TT 8J rear tail light replacement? A: The main point to watch is the rear connector clip, which can be brittle on older units and should be handled gently during removal and refitting. Also ensure the mounting tabs align properly into the fender cutout, as forcing a misaligned housing can crack the lens or damage the seal.

Q: Will this used tail light show any fault codes if the LED strip inside is worn? A: If the internal LED circuit board has degraded, the TT 8J may log a lighting circuit fault or bulb-check warning even with the light physically installed correctly. This unit has been tested for full function prior to listing specifically to rule out that issue before it reaches you.

Why Choose Us?

• Verified functionality
• Actual photos/videos provided
• 30-day exchange warranty
• Genuine Audi part number ensures exact fitment and factory light output without aftermarket guesswork

Shipping

Location: Kuala Lumpur, Malaysia Shipping: West Malaysia RM50 (Estimate) / East Malaysia RM80 (Estimate) Delivery: 1-2 working days Packaging: Secure anti-static packaging, heavy-duty shock absorption. (We send actual photos/videos of the unit and packaging before shipping)

Warranty and Return Policy

• 30-day exchange warranty from the date of receipt.
• Proof of professional installation by a qualified workshop is required for warranty claims.
• No returns if the item is opened, modified, tampered with, or damaged due to incorrect electrical wiring.
• Exchange only for confirmed internal electronic defects.

How to Order

1. WhatsApp us to confirm compatibility with your specific VIN.
2. Send your chassis number or a clear photo of your old unit label.
3. Confirm order details and stock availability.
4. Receive actual product photos and diagnostic test confirmation.
5. Make payment via bank transfer.
6. Item is shipped immediately with tracking details provided.

Contact Us

Ready to order or have questions? Tap the WhatsApp button to chat with our team directly.

Price Notice

Price is estimated only. Actual price depends on current stock levels, specific part number revisions, and unit condition. Please WhatsApp us for a formal quote.

Compatible Models