Audi TT MK2 Tail Light Assembly LH 8J0945095C - Used Original Parts

Description

Product Title

Audi TT 8J MK2 Tail Light Assembly LH 8J0945095C - Used Original Parts

Diagnosis and Common Symptoms

On the Audi TT 8J MK2, a failing left-hand tail light assembly typically presents as intermittent or total loss of rear lighting function on the driver's side (RHD Malaysian spec). Common symptoms include the dashboard "Rear Light Malfunction" or "Check Bulb" warning message, flickering brake/tail lamp segments, condensation buildup inside the lens housing, or complete failure of the LED strips due to age-related solder joint fatigue on the internal circuit board. Cracked lens housings from stone chips or rear-end contact are also frequent causes of water ingress, which shorts out the wiring loom connector pins (8J0945095C specific plug). Fault codes stored in the Central Electronics module often reference open circuit or short-to-ground on the tail light output circuit, and in some cases the indicator or reverse light segment fails independently while the brake light remains functional, pointing to a degraded internal wiring harness within the housing itself rather than a bulb issue.

Introduction

This listing is for a Genuine Used left-hand tail light assembly (Part No. 8J0945095C), removed from an Audi TT 8J MK2 during dismantling. Every unit we list has been Tested for full electrical function including brake, tail, indicator, and reverse light circuits before it goes up for sale. Sourced directly from a donor vehicle, this assembly carries no aftermarket compromises, meaning fitment and lens clarity match factory specification exactly. Ideal for owners looking to replace a cracked, faded, or electrically faulty unit without the high cost of a brand-new dealer part.

Product Details

• Brand: Audi
• Model Compatibility: Audi TT 8J MK2 (2006-2014)
• Part Name: Tail Light Assembly (Left Hand / Driver Side RHD)
• Part Number: 8J0945095C
• Condition: Genuine Used (Tested Working)
• Notes: Lens housing inspected for cracks and cloudiness, wiring harness connector checked for pin corrosion, internal circuit board tested for full segment function prior to listing.

Frequently Asked Questions

Q: How do I confirm 8J0945095C is the correct tail light for my Audi TT 8J MK2? A: Check the part number etched or printed on the rear of your existing tail light housing or on the sticker inside the boot near the original unit. 8J0945095C is specific to the left-hand side; the right-hand equivalent carries a different suffix, so matching the exact number avoids a mismatched fitment.

Q: Does the tail light on the Audi TT 8J MK2 require coding after replacement? A: No coding or adaptation is needed for the tail light assembly itself since it is a passive lighting unit wired directly into the vehicle harness. However, if your Central Electronics module previously logged a fault, it is good practice to clear the stored code with a diagnostic tool after installation.

Q: What is the typical lifespan of a used tail light assembly like this one? A: Genuine Audi tail light housings are built with durable polycarbonate lenses and factory-sealed connectors, so a well-maintained used unit can easily last several more years of service, especially once tested and confirmed fault-free before sale.

Q: Why choose a used 8J0945095C instead of a new replacement from Audi? A: A new genuine unit from Audi Malaysia carries a significant price premium and long wait times for import. A tested used original gives you the same factory fit, finish, and electrical reliability at a fraction of the cost, which makes far more practical sense for TT 8J owners.

Q: Are there any installation gotchas when fitting this tail light on the 8J MK2? A: The main point to watch is aligning the mounting clips and rubber seal correctly against the rear quarter panel to prevent water ingress, and ensuring the wiring connector locks fully into place, as a loose connection is the most common cause of intermittent lighting faults after replacement.

Why Choose Us?

• Verified functionality
• Actual photos/videos provided
• 30-day exchange warranty
• Each unit inspected for lens integrity and connector condition to rule out water ingress before dispatch

Shipping

Location: Kuala Lumpur, Malaysia Shipping: West Malaysia RM50 (Estimate) / East Malaysia RM80 (Estimate) Delivery: 1-2 working days Packaging: Secure anti-static packaging, heavy-duty shock absorption. (We send actual photos/videos of the unit and packaging before shipping)

Warranty and Return Policy

• 30-day exchange warranty from the date of receipt.
• Proof of professional installation by a qualified workshop is required for warranty claims.
• No returns if the item is opened, modified, tampered with, or damaged due to incorrect electrical wiring.
• Exchange only for confirmed internal electronic defects.

How to Order

1. WhatsApp us to confirm compatibility with your specific VIN.
2. Send your chassis number or a clear photo of your old unit label.
3. Confirm order details and stock availability.
4. Receive actual product photos and diagnostic test confirmation.
5. Make payment via bank transfer.
6. Item is shipped immediately with tracking details provided.

Contact Us

Ready to order or have questions? Tap the WhatsApp button to chat with our team directly.

Price Notice

Price is estimated only. Actual price depends on current stock levels, specific part number revisions, and unit condition. Please WhatsApp us for a formal quote.

Compatible Models