Volkswagen Passat B7 Front Lower Control Arm 1K0407165C - Used Original Parts
RM 280
Condition: Used (Original)At a Glance
- Volkswagen Passat B7 Front Lower Control Arm 1K0407165C - Used Original Parts
- Part number: 1K0407165C / 111323 / 13
- Fits: Volkswagen Passat B7 · confirm by chassis number before ordering
- Used Original · tested working
- RM 280 · final quote via WhatsApp
- M.S. Motor · Kuala Lumpur, Malaysia · ready stock
Diagnosis and Common Symptoms
Worn front lower control arms on the Passat B7 typically present as clunking or knocking noises over bumps and uneven road surfaces, most noticeable at low speeds. Drivers often report vague or wandering steering, uneven tyre wear on the front axle, and a pulling sensation under braking. Failed ball joints or perished bushings on the control arm can trigger wheel alignment drift, causing the vehicle to fail a front-end geometry check even after camber/toe adjustment. In advanced cases, excessive play can cause a rattling vibration through the steering wheel, and on vehicles fitted with electronic stability programs, ESP or ABS warning lights may illuminate due to erratic wheel speed sensor readings caused by suspension instability. A visual inspection usually reveals torn dust boots, cracked bushings, or corrosion at the mounting points.
Introduction
This is a Genuine Used front lower control arm, part number 1K0407165C, sourced directly from a Volkswagen Passat B7 during dismantling. Every unit is Tested for structural integrity, ball joint tightness, and bushing condition before listing, ensuring it is ready to bolt on without unexpected surprises. Choosing a Genuine Used component means you get factory-correct fitment and metallurgy, avoiding the fitment and durability compromises common with aftermarket reproductions. This part is a practical, cost-effective solution for Passat B7 owners looking to restore proper suspension geometry and ride quality.
Product Details
-
Brand: Volkswagen
-
Model Compatibility: Passat B7
-
Part Name: Front Lower Control Arm
-
Condition: Genuine Used (Tested Working)
-
Notes: Ball joint and bushing checked for play, no cracks or corrosion on the control arm body, dust boots inspected for tears
Frequently Asked Questions
What symptoms indicate the front lower control arm 1K0407165C needs replacement on a Passat B7?
Common signs include clunking noises over bumps, vague steering response, uneven front tyre wear, and difficulty holding wheel alignment settings. In some cases, ESP or ABS warning lights may appear due to inconsistent wheel speed sensor signals caused by suspension play.
Does the Passat B7 require wheel alignment after installing this control arm?
Yes, a four-wheel alignment is strongly recommended after installation since the control arm directly affects camber and caster settings. Skipping this step can cause uneven tyre wear even with a correctly fitted part.
How do I confirm 1K0407165C is the correct control arm for my Passat B7?
Cross-check the part number stamped on the original control arm or listed in your VW parts catalogue against 1K0407165C. This number is specific to the Passat B7 chassis and certain shared MQB/PQ35 platform models, so verifying against your chassis VIN avoids fitment mismatches.
Is a used control arm reliable compared to buying new for the Passat B7?
A genuine used unit from a low-mileage donor vehicle often outperforms cheap aftermarket reproductions in material quality and fitment accuracy. Since this unit is tested for ball joint tightness and bushing condition before sale, it offers dependable performance at a fraction of the cost of a new Volkswagen part.
Are there any installation gotchas specific to the 1K0407165C control arm?
Torque specifications for the ball joint and bushing bolts must be applied with the vehicle's suspension at normal ride height to avoid premature bushing wear. Reusing worn subframe bolts or under-torquing fasteners is a common mistake that leads to repeat noise complaints.
Part price does not include installation. Our workshop can install for you, labour is charged separately and confirmed with you before any work starts.
We cannot diagnose your car over WhatsApp or photos. Not sure this part will solve your problem? Come for a workshop check, diagnosis fee RM180. If you proceed with the repair using our parts, the RM180 is offset into the labour charge. If you decide not to repair, only the RM180 applies.
All parts are tested and guaranteed to work. Whether a part solves your car's problem can only be confirmed by diagnosis.
Shipping: from Kuala Lumpur, West Malaysia ~RM50, East Malaysia ~RM80 (estimate, confirm via WhatsApp). Delivery 1-2 working days in secure anti-static packaging.
Warranty: 30-day exchange for control units, engines, gearboxes and other major parts; 14 days for small parts. Claims require proof of installation by a qualified workshop. No warranty for items opened, modified, or damaged by wrong installation.
Prices vary with stock and part condition. Final price via WhatsApp.
Original Parts
Quality European Originals
Fast Delivery
Nationwide Shipping