BMW F30 LCI Left Outer Tail Light Assembly LED - Used Original Parts
RM 800
Condition: Used (Original)Description
Product Title
BMW F30 LCI Left Outer Tail Light Assembly LED - Used Original Parts
Diagnosis and Common Symptoms
On the F30 LCI, the left outer tail light houses the LED brake light, tail light, rear turn signal, and reflector strip circuits, all routed through the rear light control module. Common failure signs include a dim or completely dark brake light on the driver's side, illuminated "Brake Light Left Rear" or "Tail Light Left" fault messages on the instrument cluster, and rapid turn signal blinking (hyperflash) caused by an open circuit or degraded LED string. Physical symptoms often include cracked lens housing from rear-end contact, water intrusion causing condensation inside the unit, connector corrosion, or individual LED segments failing while others remain lit. Some units also show intermittent flickering during voltage fluctuations, which points to a failing LED driver board inside the housing itself rather than a bulb issue, since this assembly uses non-replaceable LED modules.
Introduction
This is a Genuine Used BMW F30 LCI left outer tail light assembly, sourced directly from a donor vehicle and fully Tested before listing. Every LED segment, brake circuit, and turn signal function has been verified operational, so you are getting original BMW build quality and light output without the cost of a brand-new dealer unit. Since this is the outer tail light section, it retains the factory LCI-specific lens design and connector layout for a true OEM fitment. Ideal for owners in Malaysia looking to restore proper rear lighting function without paying premium aftermarket or dealer pricing.
Product Details
- Brand: BMW
- Model Compatibility: F30 LCI (3 Series, post-facelift 2015 onwards)
- Part Name: Left Outer Tail Light Assembly LED
- Condition: Genuine Used (Tested Working)
- Notes: LCI-specific lens pattern differs from pre-LCI units; always cross-check the part number on the housing before ordering to confirm exact fitment on your chassis.
Frequently Asked Questions
Q: Will this left outer tail light fit a pre-LCI F30? A: No. The F30 LCI uses a different lens design and LED strip pattern than the pre-facelift model, so this outer tail light is not interchangeable with pre-LCI units. Check the part number printed on the housing to confirm it matches your F30 LCI's original part number before purchasing.
Q: Does the F30 LCI tail light assembly require coding after installation? A: In most cases no additional coding is needed since the outer tail light is a plug-and-play connector into the existing rear wiring harness. However, if the vehicle throws a bulb-check fault after install, a quick reset via the light control module using diagnostic software resolves it.
Q: What symptoms indicate this specific left outer unit is failing versus a fuse or wiring issue? A: If only the left side is affected while the right tail light functions normally, and you see uneven brightness or partial LED segments out, the fault is isolated to this outer housing's LED driver board rather than the car's wiring or fuse box.
Q: Why choose a genuine used unit instead of an aftermarket replacement? A: Aftermarket tail lights often have inconsistent LED brightness, incorrect lens tinting, and poor water sealing compared to factory BMW parts. A genuine used unit from an F30 LCI donor retains correct OEM light output, sealing, and connector fitment, and typically outlasts budget aftermarket alternatives.
Q: How do I confirm this part matches my exact F30 LCI variant? A: Locate the part number molded into the tail light housing and cross-reference it against your vehicle's original equipment list or your local BMW parts advisor. This confirms the light matches your specific F30 LCI trim and rear bumper configuration.
Why Choose Us?
- Verified functionality
- Actual photos/videos provided
- 30-day exchange warranty
- Sourced from genuine BMW F30 LCI donor vehicles, ensuring correct LED calibration and factory-fit connectors
Shipping
Location: Kuala Lumpur, Malaysia Shipping: West Malaysia RM50 (Estimate) / East Malaysia RM80 (Estimate) Delivery: 1-2 working days Packaging: Secure anti-static packaging, heavy-duty shock absorption. (We send actual photos/videos of the unit and packaging before shipping)
Warranty and Return Policy
- 30-day exchange warranty from the date of receipt.
- Proof of professional installation by a qualified workshop is required for warranty claims.
- No returns if the item is opened, modified, tampered with, or damaged due to incorrect electrical wiring.
- Exchange only for confirmed internal electronic defects.
How to Order
- WhatsApp us to confirm compatibility with your specific VIN.
- Send your chassis number or a clear photo of your old unit label.
- Confirm order details and stock availability.
- Receive actual product photos and diagnostic test confirmation.
- Make payment via bank transfer.
- Item is shipped immediately with tracking details provided.
Contact Us
Ready to order or have questions? Tap the WhatsApp button to chat with our team directly.
Price Notice
Price is estimated only. Actual price depends on current stock levels, specific part number revisions, and unit condition. Please WhatsApp us for a formal quote.
Compatible Models
Original Parts
Quality European Originals
Fast Delivery
Nationwide Shipping
