BMW F15 Front Electronic Absorber Strut Assembly EDC 37106875083 - Brand New (China-made)
RM 990
Condition: New (China-made)At a Glance
- BMW F15 Front Electronic Absorber Strut Assembly EDC 37106875083 - Brand New (China-made)
- Part number: 37106875083
- Fits: BMW F15 X5 40e, BMW F15 X5 · confirm by chassis number before ordering
- Brand New · China-made · boxed · 6-month warranty
- RM 990 · final quote via WhatsApp
- M.S. Motor · Kuala Lumpur, Malaysia · ready stock
Quick Answer
A front electronic damper strut is the right fix when the F15 X5 leaks oil from the strut body, wallows or bounces after bumps, or shows an EDC or suspension warning traced to the damper. A brand-new China-made replacement with a 6-month exchange warranty suits owners who want a new unit at the lowest cost of the three conditions we sell. It is a replacement part, not an original one. Owners who want an original part can choose a tested used original or a brand-new original from us instead.
Diagnosis and Common Symptoms
The F15 X5 front strut with EDC (Electronic Damper Control) combines a coil spring seat, a hydraulic damper and an electrically controlled valve. The control unit changes damping force by driving this valve, so the strut can fail mechanically or electrically.
Common symptoms:
- Oil film or wet streaks on the strut body, a sign of a worn damper seal
- Nose dive under braking, or the front end bouncing more than once after a bump
- Clunking or knocking from the front over rough road surfaces
- Ride stuck harsh or soft, with no change between Comfort, Normal and Sport settings
- A suspension or chassis warning in the instrument cluster or iDrive
- Stored fault entries in the damper control module for an open circuit, short circuit or implausible signal on a front damper valve
- Uneven tyre wear on the front axle, with cupping or scalloping on the tread
A scan with a BMW-capable diagnostic tool separates an electrical valve fault from a worn damper. Check the connector and wiring at the strut first, since a damaged plug can give the same fault entry as a failed valve. If the damper itself is worn, replacing both front struts together keeps damping even from side to side.
Introduction
This is a brand new, China-made replacement front electronic absorber strut assembly for the BMW F15 X5 with EDC. It is supplied boxed and is not an original part. It carries a 6-month exchange warranty, confirmed in your quote. It gives a new damper and spring seat assembly at the lowest cost of the three conditions we sell.
Product Details
- Brand: China-made replacement for BMW
- Model Compatibility: BMW F15 X5
- Part Name: Front Electronic Absorber Strut Assembly (EDC)
- Condition: Brand New China-made Replacement (Boxed), 6-month warranty
- Notes: Wheel alignment is needed after fitting.
Part Numbers and Fitment
- Part numbers: 37106875083
- Fits: BMW F15 X5
Frequently Asked Questions
What symptoms show the BMW F15 X5 front electronic absorber strut needs replacing?
On the BMW F15 X5, a failing front EDC strut shows oil leaking down the strut body, bouncing or nose dive after bumps, knocking over rough roads, or a ride that no longer changes between comfort and sport modes. A suspension warning in the cluster, or a stored fault for a front damper valve, also points to the strut. A scan is the reliable way to confirm which side is at fault.
Does the BMW F15 X5 front EDC strut assembly need wheel alignment or coding after fitting?
After fitting a front electronic absorber strut assembly on the BMW F15 X5, a wheel alignment is needed because the strut affects front suspension geometry. Coding is not normally part of the job. A workshop will usually read the fault memory afterwards and clear any stored damper entries.
How do I confirm this front electronic absorber strut assembly fits my BMW F15 X5?
Send us the chassis number (VIN) of your F15 X5 on WhatsApp and we will check it against part number 37106875083. The F15 X5 can be fitted with different suspension setups, so the VIN check confirms your car has the EDC front strut before you order.
Who is a brand-new China-made front EDC strut for the BMW F15 X5 suited to?
The brand-new China-made front electronic absorber strut assembly for the BMW F15 X5 suits owners who want a new, boxed unit at the lowest price of the three conditions we sell, with a 6-month exchange warranty. It is not an original part. Owners who prefer an original part can choose a tested used original at a lower price, or a brand-new sealed original for the longest service life.
Should both front EDC struts on the BMW F15 X5 be replaced together?
For the BMW F15 X5, replacing the front electronic absorber struts as a pair is good practice. Damping force stays matched across the axle, and the car handles and brakes more evenly. Ask us for a quotation covering both sides.
Part price does not include installation. Our workshop can install for you, labour is charged separately and confirmed with you before any work starts.
We cannot diagnose your car over WhatsApp or photos. Not sure this part will solve your problem? Come for a workshop check, diagnosis fee RM180. If you proceed with the repair using our parts, the RM180 is offset into the labour charge. If you decide not to repair, only the RM180 applies.
Brand-new China-made replacement parts are supplied boxed. They are not original parts. Whether a part solves your car's problem can only be confirmed by diagnosis.
Shipping: from Kuala Lumpur, West Malaysia ~RM50, East Malaysia ~RM80 (estimate, confirm via WhatsApp). Delivery 1-2 working days in secure anti-static packaging.
Warranty: 6 months from the invoice date, as confirmed in your quote. Exchange only, and our warranty mark must be intact. Proof of installation by a workshop is required. No warranty for parts opened, modified or damaged by wrong installation.
Prices vary with stock and part condition. Final price via WhatsApp.
Brand New Replacement
China-made, boxed, warranty as quoted
Fast Delivery
Nationwide Shipping