Audi A5 B8 Outer LED Tail Light LH 8T0945095D - Used Original Parts
RM 550
Condition: Used (Original)At a Glance
- Audi A5 B8 Outer LED Tail Light LH 8T0945095D - Used Original Parts
- Part number: 8T0945095D / 8T0 / 945 / 095 / D
- Fits: Audi A5 8T · confirm by chassis number before ordering
- Used Original · tested working
- RM 550 · final quote via WhatsApp
- M.S. Motor · Kuala Lumpur, Malaysia · ready stock
Diagnosis and Common Symptoms
On the Audi B8 A5/S5 platform, the outer tail light housing (8T0945095D) integrates the LED brake light, tail light strip, turn signal, and reflector into a single non-repairable unit. Common failure symptoms include a dead LED segment (usually the brake or tail function), flickering light strips caused by degraded internal wiring or connector corrosion, and moisture ingress behind the lens due to a cracked housing or failed seal. When a segment fails, the instrument cluster typically throws a "Bulb Failure" warning message, and in some cases the fault will log as a lighting circuit malfunction on VCDS/OBD scan tools. Physical damage from rear-end impacts or parking scrapes is also a frequent reason these units are replaced, since the housing itself cannot be economically repaired.
Introduction
This is a Genuine Used outer LED tail light (left-hand side), part number 8T0945095D, sourced directly from an Audi B8 A5/S5. The unit has been Tested for full LED function across all segments — brake, tail, and turn signal — before listing, so you receive a working assembly rather than an unknown-condition takeoff. Choosing a Genuine Used part ensures correct OE fitment, wiring compatibility, and light output matching your remaining factory lighting, without the cost or lead time of a new dealer unit. Ideal for owners replacing a cracked, faded, or partially failed tail light with an authentic Audi component.
Product Details
- Brand: Audi
- Model Compatibility: B8 A5 / S5 (Coupe, Cabriolet, Sportback)
- Part Name: Outer LED Tail Light, Left-Hand Side
- Part Number: 8T0945095D
- Condition: Genuine Used (Tested Working)
- Notes: Housing, lens, LED strips, and connector inspected for cracks, moisture damage, and full LED continuity prior to sale. Minor cosmetic wear from normal vehicle service life may be present but does not affect function.
Frequently Asked Questions
How do I confirm this 8T0945095D fits my B8 A5 or S5?
Check the part number printed on the back of your existing tail light housing against 8T0945095D. Audi used several revisions across the B8 A5/S5 production run, so matching this exact number is the only reliable way to confirm fitment, especially if your car has facelift or pre-facelift lighting.
Will the instrument cluster show a warning after installing this used tail light?
If the LED segments are functioning correctly and the connector is fully seated, no warning should appear. A "Bulb Failure" message typically only triggers if a segment is faulty or the connector isn't making proper contact, so we test full LED operation before shipping to avoid this.
Does replacing the outer tail light on the B8 A5/S5 require any coding or adaptation?
No. The outer LED tail light on the B8 platform is a plug-and-play component — it connects to the existing wiring harness with no coding, adaptation, or module programming required.
Why choose a used 8T0945095D instead of a new Audi dealer unit?
New OE tail lights for the B8 A5/S5 carry a high dealer price, and LED tail light assemblies generally last the life of the vehicle when not damaged. A tested Genuine Used unit gives you the same OE fit, finish, and light output at a fraction of the cost, which makes far more sense for owners in Malaysia running these now-discontinued or expensive-to-import parts.
Can I install this tail light myself, or does it need a technician?
Installation only requires removing the trunk-side trim panel, disconnecting the factory connector, and unbolting the housing — no special tools are needed. Most owners handle it themselves, though a technician can complete it quickly if preferred.
Part price does not include installation. Our workshop can install for you, labour is charged separately and confirmed with you before any work starts.
We cannot diagnose your car over WhatsApp or photos. Not sure this part will solve your problem? Come for a workshop check, diagnosis fee RM180. If you proceed with the repair using our parts, the RM180 is offset into the labour charge. If you decide not to repair, only the RM180 applies.
All parts are tested and guaranteed to work. Whether a part solves your car's problem can only be confirmed by diagnosis.
Shipping: from Kuala Lumpur, West Malaysia ~RM50, East Malaysia ~RM80 (estimate, confirm via WhatsApp). Delivery 1-2 working days in secure anti-static packaging.
Warranty: 30-day exchange for control units, engines, gearboxes and other major parts; 14 days for small parts. Claims require proof of installation by a qualified workshop. No warranty for items opened, modified, or damaged by wrong installation.
Prices vary with stock and part condition. Final price via WhatsApp.
Original Parts
Quality European Originals
Fast Delivery
Nationwide Shipping