Audi A5 B8 Tail Light RH 8T0945096D - Used Original Parts

Description

Product Title

Audi A5 B8 Tail Light RH 8T0945096D - Used Original Parts

Diagnosis and Common Symptoms

On the Audi A5 B8, a failing right-hand tail light assembly (8T0945096D) typically presents with intermittent brake light or turn signal function, dim or dead LED segments, and moisture ingress causing fogging inside the lens housing. Drivers often notice a "Bulb Failure" or "Check Rear Light" message on the dash MMI display, along with a corresponding fault code stored in the Central Electronics module (e.g., lighting circuit malfunction on the right rear). Cracked lens housings or corroded wiring pigtails inside the unit are common root causes, leading to erratic signal behavior or complete failure of one or more light functions. Left unaddressed, this can also trigger a persistent warning chime or MOT/roadworthiness failure due to non-compliant rear lighting.

Introduction

This is a Genuine Used Audi A5 B8 Right-Hand Tail Light, part number 8T0945096D, removed from a donor vehicle during routine dismantling. Every unit in our inventory is Tested for full function—brake, tail, turn signal, and reverse circuits—before listing, ensuring reliable performance upon installation. Sourcing a genuine used tail light is a cost-effective way to restore factory fit, finish, and light output without the premium price tag of a new unit. Ideal for owners looking to replace a cracked, faded, or malfunctioning assembly with an authentic Audi component.

Product Details

• Brand: Audi
• Model Compatibility: Audi A5 B8 (2008-2016)
• Part Name: Tail Light Right-Hand (RH)
• Part Number: 8T0945096D
• Condition: Genuine Used (Tested Working)
• Notes: Housing and lens inspected for cracks or fogging; internal wiring and bulb sockets checked for corrosion; LED segments verified for full brightness before dispatch.

Frequently Asked Questions

Q: How do I confirm the 8T0945096D fits my Audi A5 B8? A: Check the part number printed on the back of your existing tail light housing—it should read 8T0945096D or a direct-superseded equivalent. This confirms correct fitment for A5 B8 chassis variants, including Sportback and Coupe models within the applicable production years.

Q: Does installing this tail light on the A5 B8 require coding or adaptation? A: In most cases no coding is needed since the tail light itself is a passive component controlled by the existing wiring harness and Central Electronics module. However, if your vehicle previously had a fault stored, it's advisable to clear the code using VCDS or a compatible diagnostic tool after installation.

Q: What symptoms indicate the original tail light needs replacement? A: Common signs include a dashboard "Bulb Failure" warning, dim or non-functioning LED segments, water fogging inside the lens, or a cracked housing. If brake or turn signal function is inconsistent despite good bulbs, the housing or internal wiring is likely at fault.

Q: Why choose a genuine used tail light over a new aftermarket one for the A5 B8? A: Genuine used units retain factory-accurate light output, lens clarity, and connector fitment that generic aftermarket parts often fail to match. Given tail light assemblies rarely wear out mechanically, a tested used 8T0945096D offers years of remaining service life at a fraction of new OEM pricing.

Q: Will this tail light work with both facelift and pre-facelift Audi A5 B8 models? A: No—always verify against the part number since the B8 pre-facelift and facelift (8T3) versions use different housings and light patterns. The 8T0945096D is specific to a particular production range, so matching the exact part number is essential before purchase.

Why Choose Us?

• Verified functionality
• Actual photos/videos provided
• 30-day exchange warranty
• Housing and connector integrity checked to prevent moisture ingress after installation

Shipping

Location: Kuala Lumpur, Malaysia Shipping: West Malaysia RM50 (Estimate) / East Malaysia RM80 (Estimate) Delivery: 1-2 working days Packaging: Secure anti-static packaging, heavy-duty shock absorption. (We send actual photos/videos of the unit and packaging before shipping)

Warranty and Return Policy

• 30-day exchange warranty from the date of receipt.
• Proof of professional installation by a qualified workshop is required for warranty claims.
• No returns if the item is opened, modified, tampered with, or damaged due to incorrect electrical wiring.
• Exchange only for confirmed internal electronic defects.

How to Order

1. WhatsApp us to confirm compatibility with your specific VIN.
2. Send your chassis number or a clear photo of your old unit label.
3. Confirm order details and stock availability.
4. Receive actual product photos and diagnostic test confirmation.
5. Make payment via bank transfer.
6. Item is shipped immediately with tracking details provided.

Contact Us

Ready to order or have questions? Tap the WhatsApp button to chat with our team directly.

Price Notice

Price is estimated only. Actual price depends on current stock levels, specific part number revisions, and unit condition. Please WhatsApp us for a formal quote.

Compatible Models