Mini Cooper R60 R61 Body Control Module (BCM) - Used Original Parts

Diagnosis and Common Symptoms

From the workshop floor, the Body Control Module, or Footwell Module (FRM3) as it's known in the system, is the central nervous system for your Mini's cabin electronics. Failure isn't always catastrophic; it often begins with intermittent, frustrating electrical gremlins. A common trigger for complete failure is a voltage drop during battery replacement or jump-starting, which can corrupt the module's data.

Common symptoms we diagnose include:

• Headlights are permanently switched on, with no ability to turn them off.
• Power windows, sunroof, and mirror controls become completely inoperative.
• Turn signals and hazard lights fail to function.
• Interior lighting does not work.
• Dashboard displays a persistent "Car on Lift" symbol or multiple bulb failure warnings.

Diagnostic trouble codes (DTCs) pointing to a faulty BCM/FRM often include:

• A8C4, A8C5: Hall Sensor faults for power windows.
• 9CC5, 9CC6: Mirror adjustment potentiometer errors.
• Multiple short circuit fault codes for lighting outputs that cannot be cleared.
• Complete loss of communication with the module on the CAN bus.

Introduction

This is a Genuine Mini Body Control Module, meticulously removed from a donor R60 or R61 vehicle. We understand that a new module from the dealer is prohibitively expensive, which is why we offer a reliable, cost-effective solution. Each BCM undergoes a full diagnostic bench test to verify communication, input/output signals, and ensure it is free from the common logic failures that plague these units. You are purchasing a fully operational, tested component ready for professional installation.

Product Details

• Brand: Mini

• Model Compatibility: R60 Countryman (2010-2016), R61 Paceman (2013-2016)

• Part Name: Body Control Module (BCM) / Footwell Module (FRM3)

• Condition: Genuine Used (Tested Working)

• Notes: This module MUST be coded and programmed to your vehicle's specific VIN and option list (VO). Failure to do so will result in improper function. We strongly recommend matching the part number from your original unit to ensure compatibility.