Mercedes-Benz W22 Headlamp Washer Nozzle A2218601447 - Used Original Parts

Description

Product Title

Mercedes-Benz W22 Headlamp Washer Nozzle A2218601447 - Used Original Parts

Diagnosis and Common Symptoms

The headlamp washer nozzle on the W221 S-Class chassis is a mechanical component tied into the high-pressure washer circuit that activates alongside the windscreen washers or headlamp cleaning cycle. Failure typically presents as weak or absent spray from one or both headlamp jets, a nozzle that fails to extend/retract with the telescopic washer arm, or visible cracking and leakage around the housing. Drivers often notice water pooling under the bumper, an uneven spray pattern, or the washer pump running audibly while no fluid reaches the headlamp lens. While this component does not usually trigger a hard fault code, on some W221 variants a stuck or jammed nozzle mechanism can cause the washer pump to draw excessive current, occasionally logging a washer system malfunction in the fluid level or washer relay circuit. Corrosion at the nozzle-to-arm linkage and UV-cracked plastic housings are the most common wear points after years of service.

Introduction

This is a Genuine Used Mercedes-Benz W221 headlamp washer nozzle, part number A2218601447, removed from a running donor vehicle and Tested for correct spray pattern and mechanical extension before listing. Sourced directly from an original Mercedes-Benz assembly, it retains factory-correct fitment and material tolerances that generic replacements often fail to match. Every unit is physically inspected for cracks, brittleness, and linkage wear prior to sale. Buying Genuine Used gives you a reliable, budget-conscious alternative to costly new dealer pricing without compromising on fitment accuracy.

Product Details

• Brand: Mercedes-Benz
• Model Compatibility: W221 S-Class
• Part Name: Headlamp Washer Nozzle
• Part Number: A2218601447
• Condition: Genuine Used (Tested Working)
• Notes: Inspected for spray function, housing integrity, and linkage movement; no cracks or brittleness found at time of testing

Frequently Asked Questions

Q: How do I confirm A2218601447 is the correct nozzle for my W221? A: Check the part number stamped or molded on the underside of your existing nozzle housing, or on the invoice from your last headlamp washer service. A2218601447 is specific to the W221 chassis, so confirming the number against your vehicle's build sheet or an existing unit avoids mismatched fitment between left and right sides.

Q: Does replacing this nozzle on the W221 require any coding or adaptation? A: No. The headlamp washer nozzle is a purely mechanical part with no control module or sensor tied to it, so there is no coding, adaptation, or SCN coding required after installation. Simply mount, connect the washer hose, and test the spray cycle.

Q: What symptoms indicate the nozzle itself has failed rather than the pump or hose? A: If the washer pump runs and fluid is present in the reservoir but no spray or only a weak dribble comes from the headlamp jet, the nozzle orifice or telescopic extension mechanism is usually the cause. A cracked housing will also show visible fluid leakage around the bumper area during activation.

Q: Why choose a used A2218601447 nozzle instead of a new aftermarket one? A: Genuine used nozzles are built to Mercedes-Benz factory tolerances, meaning correct spray angle and telescopic action are preserved. Aftermarket units frequently have a slightly different spray pattern or looser extension mechanism, and given the low mechanical wear on this part over its service life, a tested genuine used unit offers excellent value in Malaysia compared to new dealer pricing.

Q: How long does a used headlamp washer nozzle typically last after installation? A: Since this component has no electronic wear parts, a tested unit with intact housing and clean linkage typically performs for several more years of normal use, provided it is not exposed to prolonged direct sun or physical impact.

Why Choose Us?

• Verified functionality
• Actual photos/videos provided
• 30-day exchange warranty
• Genuine factory spray geometry ensures correct headlamp lens coverage without retrofitting aftermarket parts

Shipping

Location: Kuala Lumpur, Malaysia Shipping: West Malaysia RM50 (Estimate) / East Malaysia RM80 (Estimate) Delivery: 1-2 working days Packaging: Secure anti-static packaging, heavy-duty shock absorption. (We send actual photos/videos of the unit and packaging before shipping)

Warranty and Return Policy

• 30-day exchange warranty from the date of receipt.
• Proof of professional installation by a qualified workshop is required for warranty claims.
• No returns if the item is opened, modified, tampered with, or damaged due to incorrect electrical wiring.
• Exchange only for confirmed internal electronic defects.

How to Order

1. WhatsApp us to confirm compatibility with your specific VIN.
2. Send your chassis number or a clear photo of your old unit label.
3. Confirm order details and stock availability.
4. Receive actual product photos and diagnostic test confirmation.
5. Make payment via bank transfer.
6. Item is shipped immediately with tracking details provided.

Contact Us

Ready to order or have questions? Tap the WhatsApp button to chat with our team directly.

Price Notice

Price is estimated only. Actual price depends on current stock levels, specific part number revisions, and unit condition. Please WhatsApp us for a formal quote.

Compatible Models