Audi A4 B8 Power Steering Pressure Hose 8K2422893CA - Used Original Parts
RM 150
Condition: Used (Original)At a Glance
- Audi A4 B8 Power Steering Pressure Hose 8K2422893CA - Used Original Parts
- Part number: 8K2422893CA
- Fits: Audi A4 B8 · confirm by chassis number before ordering
- Used Original · tested working
- RM 150 · final quote via WhatsApp
- M.S. Motor · Kuala Lumpur, Malaysia · ready stock
Quick Answer
When an A4 B8 shows a wet, weeping or dripping high-pressure line between the steering pump and the rack, replacing the hose is the right fix, and a tested used original unit is a sound way to do it. It suits owners who want the original Audi hose, with its factory length, fittings and routing, at a lower price than new. The tested used original carries the warranty stated in the quote.
Diagnosis and Common Symptoms
The pressure hose carries hot, pressurised fluid from the power steering pump to the steering rack. It is under load every time the wheel is turned, and in Malaysian heat and stop-go traffic the rubber and crimped ends work hard. Typical signs of a failing hose on a hydraulic-assist Audi A4 B8:
- Fluid drips or a wet, oily film on the hose, its crimped ends or the area beneath the pump and rack
- Reservoir level that keeps dropping with no other visible source
- Whining or groaning from the pump, especially on full lock or when parking
- Steering that feels heavy at low speed or assists unevenly
- Foamy or aerated fluid in the reservoir after air has been drawn in
- A burning smell when fluid reaches hot exhaust or engine components
- A swollen, cracked or soft section along the hose
A hose leak usually does not store a dedicated fault code. It is found by inspection and by these symptoms, so check the hose and its fittings before blaming the pump or the rack. Fix a leak early, because running the pump low on fluid can damage it.
Introduction
This is a Genuine Used Audi power steering pressure hose, removed from an A4 B8 and tested before it is listed. It is an original part, so the fittings, length and routing match the factory design. Every unit is checked for working condition, and we supply actual photos so you can see exactly what you are buying. It is a practical choice when you want original quality for your A4 B8 without paying for a new part.
Product Details
- Brand: Audi
- Model Compatibility: Audi A4 B8
- Part Name: Power Steering Pressure Hose (Steering Rack Hose)
- Condition: Genuine Used (Tested Working)
Part Numbers and Fitment
- Part numbers: 8K2422893CA
- Fits: Audi A4 B8
Frequently Asked Questions
What are the signs that an Audi A4 B8 power steering pressure hose needs replacing?
On an Audi A4 B8, a failing power steering pressure hose shows up as fluid dripping or a wet film along the hose and its crimped ends, a reservoir level that keeps falling, and a whining pump on full lock. Steering that feels heavy at low speed is another sign. A hose leak normally does not set a dedicated fault code, so a visual check of the hose and fittings is the quickest way to confirm it.
Does the Audi A4 B8 power steering pressure hose need wheel alignment or coding after fitting?
The Audi A4 B8 power steering pressure hose is a hydraulic line, so it needs no coding or programming. Swapping the hose alone does not normally call for a wheel alignment. If other steering or suspension parts are disturbed during the job, an alignment check is worthwhile.
How do I confirm this pressure hose fits my Audi A4 B8?
Compare the number on your existing Audi A4 B8 power steering pressure hose with the part number in the Part Numbers and Fitment section of this page. Hose versions can differ between A4 B8 variants, so a number match matters more than the model name alone. If the old hose is hard to read, send us your chassis number (VIN) and we will check it against the listing.
Who is a tested used original Audi A4 B8 power steering pressure hose suited to?
The tested used original Audi A4 B8 power steering pressure hose suits owners who want a Genuine Audi part at a lower price than new, typically for a daily-driven car. It gives original fitment and has been tested working, with the warranty stated in the quote. We also supply brand-new original (sealed, the longest life) and brand-new China-made (the lowest price, with an exchange warranty, not original) if either suits your plans better.
Part price does not include installation. Our workshop can install for you, labour is charged separately and confirmed with you before any work starts.
We cannot diagnose your car over WhatsApp or photos. Not sure this part will solve your problem? Come for a workshop check, diagnosis fee RM180. If you proceed with the repair using our parts, the RM180 is offset into the labour charge. If you decide not to repair, only the RM180 applies.
All parts are tested and guaranteed to work. Whether a part solves your car's problem can only be confirmed by diagnosis.
Shipping: from Kuala Lumpur, West Malaysia ~RM50, East Malaysia ~RM80 (estimate, confirm via WhatsApp). Delivery 1-2 working days in secure anti-static packaging.
Warranty: 7, 14 or 30 days depending on the part, as confirmed in your quote, from the invoice date. Exchange only, and our warranty mark must be intact. Proof of installation by a workshop is required. No warranty for parts opened, modified or damaged by wrong installation.
Prices vary with stock and part condition. Final price via WhatsApp.
Original Parts
Quality European Originals
Fast Delivery
Nationwide Shipping